Sidebar

[Архив] REVOLUTiON CSM SourceSDK SP3

Status
Not open for further replies.

P@R@-Z-1T

Member
Sep 13, 2007
170
33
0
16
И я незнаю... А мне Сорс вообще не нравится
Как скачал эти злощастные 25 метров КаэСэМа. SetUpнул - Абышто! Текстуры незапичкивабтся в этот HAMMER
 

horror11

New member
Oct 28, 2007
5
0
0
У меня тоже глюки с морганием текстур в хаммере. Видяха Nvidia 7900 GS.
И еще знает кто че за проблема такая - создаю воду в хааммере, в самой проге она показывается а в игре просто как будто и нету воды, но если нырнешь под нее, то тогда все гуд, тоесть если смотреть из под воды то все норм, а если сверху сомтреть на воду то там ниче не показывает ...
 

Prince_Pers

New member
Jun 15, 2007
1
0
0
блин, что за фигня, у мня ваще не качается SDK, даже окна не вылазит, в котором пароль и ник надо ввести, кто-нить знает, в чём дело?
 

phobos2077

New member
Nov 4, 2007
29
36
Вопрос к авторам данного пакета (если они здесь бывают :) ):
Можно ли мне сделать зеркало на инсталл CSM SourceSDK SP3 на своем хостинге?

Просто я долго искал сам где бы его скачать, и, странно, такая нужная вещь, а скачать можно всего в нескольких местах.

И еще... респект вам огромнейший за то что поддерживаете Non-steam мапперов!!!
 

Diablo II

Active member
Dec 21, 2005
1,327
34
0
36
Ад
2 TRUP@C: Че-то тебя уже 5 дней нет?!?! Или на отдыхе или на работе... :spy:
Вот такой вопрос созрел: Когда будет обновление движка в КСМ СДК до Source Engine 12???
 

cr0w312

New member
Oct 21, 2006
13
43
0
0
horror11 said:
И еще знает кто че за проблема такая - создаю воду в хааммере, в самой проге она показывается а в игре просто как будто и нету воды, но если нырнешь под нее, то тогда все гуд, тоесть если смотреть из под воды то все норм, а если сверху сомтреть на воду то там ниче не показывает ...
такое бывает если есть дырки на карте, треба откомпилировать карту, а затем, выбрать пункт Load pointfile в меню хаммера во вкладке map. Тут-то красная линия и покажет тебе где у тебя утечка на карте.
 

horror11

New member
Oct 28, 2007
5
0
0
cr0w312 said:
такое бывает если есть дырки на карте, треба откомпилировать карту, а затем, выбрать пункт Load pointfile в меню хаммера во вкладке map. Тут-то красная линия и покажет тебе где у тебя утечка на карте.
Спасибо! Все заработало как по маслу :]
 
VIP
Oct 8, 2005
4,828
6
38
2 HL.ExE:
Тебе просто кажется. Когда СП4 выйдет, данная тема будет переименована.
 

cr0w312

New member
Oct 21, 2006
13
43
0
0
Monster_13 said:
Чо за фигня WARNING: node with unbounded volume??Как ее исправить??
По-подробнее в этом месте расскажи. Или внимательно посмотри лог, а еще лучше дай посмотреть другим=))
 

Monster_13

New member
Nov 7, 2007
4
0
0
Воть:

** Executing...
** Command: "D:\SourceSDK\bin\vbsp.exe"
** Parameters: -game "D:\Games\Half-Life2DE\***" "D:\SourceSDK\hl2\***"

Valve Software - vbsp.exe (Dec 11 2006)
1 threads
materialPath: D:\Games\Half-Life2DE\***\materials
Loading D:\SourceSDK\hl2\***.vmf
Brush 30, Side 2: duplicate plane
Brush 30, Side 3: duplicate plane
Brush 30, Side 4: duplicate plane
(много такой же фигни с разными брашами)
fixing up env_cubemap materials on brush sides...
env_cubemap pointing at deleted brushside near (-624, 2008, -103)
ProcessBlock_Thread: 0...1...2...3...4...5...6...7...8...9...10 (1)
WARNING: node with unbounded volume
(Дофига такой же фигни)
**** leaked ****
Entity infodecal (-2304.00 -1094.95 -83.87) leaked!

FindPortalSide: Couldn't find a good match for which brush to assign to a portal near (15872.0, 16384.0, 0.0)
Leaf 0 contents:
Leaf 1 contents: CONTENTS_SOLID
viscontents (node 0 contents ^ node 1 contents): CONTENTS_SOLID
This means that none of the brushes in leaf 0 or 1 that touches the portal has CONTENTS_SOLID
Check for a huge brush enclosing the coordinates above that has contents CONTENTS_SOLID
Candidate brush IDs:


FindPortalSide: Couldn't find a good match for which brush to assign to a portal near (16384.0, 15872.0, 0.0)
Leaf 0 contents:
Leaf 1 contents: CONTENTS_SOLID
viscontents (node 0 contents ^ node 1 contents): CONTENTS_SOLID
This means that none of the brushes in leaf 0 or 1 that touches the portal has CONTENTS_SOLID
Check for a huge brush enclosing the coordinates above that has contents CONTENTS_SOLID
Candidate brush IDs:


FindPortalSide: Couldn't find a good match for which brush to assign to a portal near (14848.0, 16384.0, 0.0)
Leaf 0 contents:
Leaf 1 contents: CONTENTS_SOLID
viscontents (node 0 contents ^ node 1 contents): CONTENTS_SOLID
This means that none of the brushes in leaf 0 or 1 that touches the portal has CONTENTS_SOLID
Check for a huge brush enclosing the coordinates above that has contents CONTENTS_SOLID
Candidate brush IDs:


FindPortalSide: Couldn't find a good match for which brush to assign to a portal near (13824.0, 16384.0, 0.0)
Leaf 0 contents:
Leaf 1 contents: CONTENTS_SOLID
viscontents (node 0 contents ^ node 1 contents): CONTENTS_SOLID
This means that none of the brushes in leaf 0 or 1 that touches the portal has CONTENTS_SOLID
Check for a huge brush enclosing the coordinates above that has contents CONTENTS_SOLID
Candidate brush IDs:


FindPortalSide: Couldn't find a good match for which brush to assign to a portal near (16384.0, 14848.0, 0.0)
Leaf 0 contents:
Leaf 1 contents: CONTENTS_SOLID
viscontents (node 0 contents ^ node 1 contents): CONTENTS_SOLID
This means that none of the brushes in leaf 0 or 1 that touches the portal has CONTENTS_SOLID
Check for a huge brush enclosing the coordinates above that has contents CONTENTS_SOLID
Candidate brush IDs:


FindPortalSide: Couldn't find a good match for which brush to assign to a portal near (16384.0, 13824.0, 0.0)
Leaf 0 contents:
Leaf 1 contents: CONTENTS_SOLID
viscontents (node 0 contents ^ node 1 contents): CONTENTS_SOLID
This means that none of the brushes in leaf 0 or 1 that touches the portal has CONTENTS_SOLID
Check for a huge brush enclosing the coordinates above that has contents CONTENTS_SOLID
Candidate brush IDs:


FindPortalSide: Couldn't find a good match for which brush to assign to a portal near (12800.0, 16384.0, 0.0)
Leaf 0 contents:
Leaf 1 contents: CONTENTS_SOLID
viscontents (node 0 contents ^ node 1 contents): CONTENTS_SOLID
This means that none of the brushes in leaf 0 or 1 that touches the portal has CONTENTS_SOLID
Check for a huge brush enclosing the coordinates above that has contents CONTENTS_SOLID
Candidate brush IDs:


FindPortalSide: Couldn't find a good match for which brush to assign to a portal near (11776.0, 16384.0, 0.0)
Leaf 0 contents:
Leaf 1 contents: CONTENTS_SOLID
viscontents (node 0 contents ^ node 1 contents): CONTENTS_SOLID
This means that none of the brushes in leaf 0 or 1 that touches the portal has CONTENTS_SOLID
Check for a huge brush enclosing the coordinates above that has contents CONTENTS_SOLID
Candidate brush IDs:

*** Suppressing further FindPortalSide errors.... ***
Processing areas...done (0)
Building Faces...done (0)
FixTjuncs...
PruneNodes...
WriteBSP...
HashVec: point outside valid range

** Executing...
** Command: "D:\SourceSDK\bin\vvis.exe"
** Parameters: -game "D:\Games\Half-Life2DE\***" "D:\SourceSDK\hl2\***"

Valve Software - vvis.exe (May 22 2006)
1 threads
reading d:\sourcesdk\hl2\***.bsp
Error opening d:\sourcesdk\hl2\***.bsp

** Executing...
** Command: "D:\SourceSDK\bin\vrad.exe"
** Parameters: -game "D:\Games\Half-Life2DE\***" "D:\SourceSDK\hl2\***"

Valve Software - vrad.exe SSE (May 22 2006)
----- Radiosity Simulator ----
1 threads
[Reading texlights from 'lights.rad']
[45 texlights parsed from 'lights.rad']

Loading d:\sourcesdk\hl2\***.bsp
Error opening d:\sourcesdk\hl2\***.bsp

** Executing...
** Command: Copy File
** Parameters: "D:\SourceSDK\hl2\***.bsp" "D:\Games\Half-Life2DE\***\maps\***.bsp"

The command failed. Windows reported the error:
"Не удается найти указанный файл."

Еще кстати вото чо за бадяга <<The command failed. Windows reported the error:
"Не удается найти указанный файл.">>????
 

HoRRoR

...
Jan 5, 2006
4,593
7
38
2 Monster_13:
**** leaked ****
Entity infodecal (-2304.00 -1094.95 -83.87) leaked!

дырка на карте
 

l00ny

New member
Nov 8, 2007
2
0
0
Помогите с инстоляцией пожалуйста !
Скачал sourcesdk 3 заинстолтровал, а увидеть новых "npc" (министрайдера, лечинок и.т.д) немогу когда ставлю на землю у меня за место этого "npc" "error"
Напешите пожалуйста подробную инстоляцию, что-бы можно было все видеть без "error" и использовать все как в простом sourceSDK (и что мне для этого надо)
 
Status
Not open for further replies.

Game Server

Доноры Красавчики

Members online